SP Bel-Art "SPACE SAVER" Polycarbonate Vacuum Desiccator with White Polypropylene Bottom; 0.20 cu. ft.

Double click on above image to view full picture

Zoom Out
Zoom In

SP Bel-Art "SPACE SAVER" Polycarbonate Vacuum Desiccator with White Polypropylene Bottom; 0.20 cu. ft.

Great Alternative to Heavy Glass Desiccators

Degas liquids quickly and easily in the laboratory or classroom with this small plastic vacuum desiccator. These strong, shatterproof units provide dry storage and protection for sensitive products.
Lighter and less costly than similarly sized glass models; does not chip like glass
Holds a full vacuum (29.9" Hg) at room temperature for 24 hours
Tapered polypropylene stopcock with PTFE plug (F42040-0000) accepts tubing with ¼ to ⅜” I.D. and allows a controlled entrance of air preventing unnecessary turbulence
Neoprene O-ring assures a tight seal down to 0˚C without the need for grease (ring will not be harmed if grease is used)
‘Flat Dome,’ clear polycarbonate top with large ribbed knob maximizes interior clearances and provides an average of 13% greater interior volume over standard hemispherical domes
All models include a 0.32 cm (⅛") thick perforated plate; disposable or reusable desiccant can be placed on or under this plate
White polypropylene bottom models can support incandescent crucibles on Minerit HD High Heat Ceramic Desiccator Plates (series F42038)
Clear polycarbonate bottom models offer increased viewing visibility from more angles
Image: CA Prop 65 Warning  WARNING:  Reproductive Harm  www.P65Warnings.ca.gov
Catalog No.: Volume Flange O.d Inside Diameter Plate Diameter Overall Height Clearance Above Plate Quantity / Pack
 
A. White Polypropylene Bottom - Can support incandescent crucibles on Minerit HD High Heat Desiccator Plates, available separately
F42020-0000 0.20 cu. ft. 23cm (9¹/₁₆") 19.7cm (7¾") 19cm No.4 26cm (10¼") 15.7cm (6³/₁₆") 1
customer service
 
call us | 1.800.423.5278
 
email us | info@belart.com
 
faq